Globe 50239 Motion Night Light 🅱️

This device is not ESP based and will require Cloudcutter/ESPHome LibreTiny due to the WB3S module (bk7231t) chipset.

The night light is 5 channel color plug with a built in PIR motion sensor. The PIR is not coupled to the LEDs, creating a very flexible use night light for notifications, motion for automated lighting, etc.

Purchase on Amazon

GPIO Layout

GPIO	Component	Description
P1	Button
P6	Warm White LEDs
P8	Cold White LEDs
P9	Red LEDs
P14	PIR Motion
P24	Green LEDs
P26	Blue LEDs

ESPHome YAML

substitutions:
  name: globe-motion
  friendly_name: Globe Motion

esphome:
  name: ${name}
  name_add_mac_suffix: true

bk72xx:
  board: generic-bk7231t-qfn32-tuya

logger:
api:
ota:
  platform: esphome

wifi:
  ssid: !secret wifi_ssid
  password: !secret wifi_password
  ap:
    ssid: ${name}AP
    password: "ESPNotHome"

captive_portal:

web_server:

text_sensor:
  - platform: template
    name: ${friendly_name} Uptime Human Readable
    id: uptime_human
    icon: mdi:clock-start
  - platform: wifi_info
    ip_address:
      name: ${friendly_name} IP Address
      entity_category: diagnostic

sensor:
  - platform: uptime
    name: ${friendly_name} Uptime Sensor
    id: uptime_sensor
    update_interval: 60s
    on_raw_value:
      then:
        - text_sensor.template.publish:
            id: uptime_human
            state: !lambda |-
              int seconds = round(id(uptime_sensor).raw_state);
              int days = seconds / (24 * 3600);
              seconds = seconds % (24 * 3600);
              int hours = seconds / 3600;
              seconds = seconds % 3600;
              int minutes = seconds /  60;
              seconds = seconds % 60;
              return (
                (days ? to_string(days) + "d " : "") +
                (hours ? to_string(hours) + "h " : "") +
                (minutes ? to_string(minutes) + "m " : "") +
                (to_string(seconds) + "s")
              ).c_str();

binary_sensor:
  - platform: status
    name: ${friendly_name} Status
    entity_category: diagnostic

  - platform: gpio
    name: ${friendly_name} Motion
    pin: P14
    device_class: motion

  - platform: gpio
    name: ${friendly_name} Button
    pin:
      number: P1
      inverted: true

button:
  - platform: restart
    id: restart_button
    name: ${friendly_name} Restart
    entity_category: diagnostic

output:
  - platform: libretiny_pwm
    id: output_red
    pin: P9
  - platform: libretiny_pwm
    id: output_green
    pin: P24
  - platform: libretiny_pwm
    id: output_blue
    pin: P26
  - platform: libretiny_pwm
    id: output_cold_white
    pin: P8
  - platform: libretiny_pwm
    id: output_warm_white
    pin: P6

light:
  - platform: rgbww
    name: ${friendly_name}
    id: the_light
    red: output_red
    green: output_green
    blue: output_blue
    cold_white: output_cold_white
    warm_white: output_warm_white
    cold_white_color_temperature: 6500 K
    warm_white_color_temperature: 2700 K
    color_interlock: true
    constant_brightness: true
    effects:
      - random:
      - random:
          name: "Slow Random"
          transition_length: 30s
          update_interval: 30s
      - random:
          name: "Fast Random"
          transition_length: 4s
          update_interval: 5s

Thanks to Tony for the YAML!

Serial Flashing

USB TTL	Beken Chip	Note
3V3	3V3
GND	GND
RX	TX1	Transposed
TX	RX1	Transposed
GND	CEN	Reset pin to tap randomnly until read starts

Pics